Page 7 - fukokukorea

Product Property Curability

Item Test Condition Unit FKC Note 100 100℃ 100 120℃
Curing Rate [%] 50 Curing Rate [%] 50

General

Mix Ratio - - A / B 1 : 1

Viscosity (A) 25℃, 1RPM, No.6 Spindle Pa〮s 500 Brookfield 0 0
0 10 16 20 30 0 10 20 30
Viscosity (B) 25℃, 1RPM, No.6 Spindle Pa〮s 450 Brookfield Time [min] Time [min]

Density 25℃, Gravimeter g/cm 3 1.90 ASTM D792
150℃
Mechanical 100
Curing Rate [%] 50
Hardness Shore 00 - 40 ~ 60 ASTM D2240

Elongation - % 50 ASTM D412

Electrical 0

0 7 10 20 30
Flame Rating Vertical Burning Test - V-0 UL.94 Time [min]

Withstand Voltage AC 3000V < 0.15mA ASTM D149
Product Manual
Volume Resistivity MΩ〮m > 2

Thermal
Each product comes as separate A and B components that must be mixed together in 1:1 ratio to
Thermal Conductivity - W/m.K 3.2 ASTM D5470 initiate the curing reaction. The curing reaction proceeds at room temperature, so the work should
be done as quickly as possible. Be sure to use a specialized dispenser. Before work begins, clean all
Cure containers and tools to be used so they are free of dirt, water, oil, etc.

Pot Life @25℃ Time for viscosity to double Hr 4 1 Stirring before mixing 2 Measuring 3 Mixing, stirring, degassing 4 Application

Cure @25℃ Oven Hr 24 Fillers may sink to the bottom of Measure out Mix components A and B together, After stirring and
containers. Be sure to stir up the components A stir well, and vacuum degas. degassing, apply as
components thoroughly prior to use. and B. quickly as possible.
Cure @100℃ Oven Min 20

Cure @120℃ Oven Min 15 5 Storage
Seal the product tightly for storage. After use, clean containers and tools used for mixing and stirring (with solvent, etc.).
Cure @150℃ Oven Min 10 1) Storage conditions
- Storage Period : Use within 2 months (Under Review)
- Storage Temperature : 15~25°C * Avoid direct sunlight and store in a cool and dark place with low humidity.
2) Products container : 20L & 200L Drum can

07 08